Constantan Konstantan Wire / CuNi44 Wire
Basic Info
Model No.: CuNi44(Constantan)
Product Description
Model NO.: CuNi44(Constantan)
Material: Copper and Nickel
Resistivity: 0.49+-5%
Elongation: >25%
State: Annealed and Hard
Other Name: Nc050
Transport Package: Spool/Coil, Carton, Wooden Case
Origin: China
Product Type: Wire
Carbon Content: No
Density: 8.9(g/cm3)
Melting Point: 1280
Surface: Bright
Trademark: Tankii
Specification: RoHS, ISO 9001
HS Code: 7409400000
Constantan Konstantan Wire/Cuni44 Wire
Constantan Wire Definition
Resistance alloy with moderate resistivity and low temperature coefficent of resistance with a flat resistance/temperature curve over a wider range than the "manganins". Constantan also shows better corrosion resistance than the man ganins. Uses tend to be restricted to ac circuits. Constantan is also the negative element of the type J thermocouple with Iron being the positive; type J thermocouples are used in heat treating applications. Also, it is the negative element of the type T thermocouple with OFHC Copper the positive; type T thermocouples are used at cryogenic temperatures.

Chemical Content, %
Ni | Mn | Fe | Si | Cu | Other | ROHS Directive | |||
Cd | Pb | Hg | Cr | ||||||
44 | 1.50% | 0.5 | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
Max Continuous Service Temp | 400ºC |
Resisivity at 20ºC | 0.49±5%ohm mm2/m |
Density | 8.9 g/cm3 |
Thermal Conductivity | -6(Max) |
Melting Point | 1280ºC |
Tensile Strength,N/mm2 Annealed,Soft | 340~535 Mpa |
Tensile Strength,N/mm3 Cold Rolled | 680~1070 Mpa |
Elongation(anneal) | 25%(Min) |
Elongation(cold rolled) | ≥Min)2%(Min) |
EMF vs Cu, μV/ºC (0~100ºC) | -43 |
Micrographic Structure | austenite |
Magnetic Property | Non |
Constantan Wire Tradenames:
Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45,
Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan
Resistance Alloy- Constantan Sizes / Temper Capabilities
Condition: Bright, Annealed, Soft
Wire diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameter 1mm-30mm
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm
Package

Contact us if you need more details on Constantan Wire. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cuni44、Precision Resitance Alloy Wire. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Copper Nickel Alloys > Constantan Wire