CuNi2/CuNi44/Resistance Copper Nickel Alloy Strip

Model NO.: low resistance alloy Material: Cuni Alloy PCD: 120mm Hole: 5 surface: bright Trademark: TANKII Specification: 0.005mm~3.0mm HS Code: 7408229000 Product Type: Strip Carbon Content: Low Carbon ET: 15mm standard: GB/ASTM/JIS/BIS/DIN Size: 0.01-10mm Transport Package: According Client′s Requirement Origin: China Cuni2/Cuni44/Copper Nickel Alloy Strip

Constantan Wire Definition
Resistance alloy with moderate resistivity and low temperature coefficent of resistance with a flat resistance/temperature curve over a wider range than the "manganins". Constantan also shows better corrosion resistance than the man ganins. Uses tend to be restricted to ac circuits. Constantan is also the negative element of the type J thermocouple with Iron being the positive; type J thermocouples are used in heat treating applications. Also, it is the negative element of the type T thermocouple with OFHC Copper the positive; type T thermocouples are used at cryogenic temperatures.
 
Chemical Content, %

Ni	Mn	Fe	Si	Cu	Other	ROHS Directive
						Cd	Pb	Hg	Cr
44	1.50%	0.5	-	Bal	-	ND	ND	ND	ND

 
 
Mechanical Properties

Max Continuous Service Temp	400ºC
Resisivity at 20ºC	0.49±5%ohm mm2/m
Density	8.9 g/cm3
Thermal Conductivity	-6(Max)
Melting Point	1280ºC
Tensile Strength,N/mm2   Annealed,Soft	340~535 Mpa
Tensile Strength,N/mm3   Cold Rolled	680~1070 Mpa
Elongation(anneal)	25%(Min)
Elongation(cold rolled)	≥Min)2%(Min)
EMF vs Cu, μV/ºC (0~100ºC)	-43
Micrographic Structure	austenite
Magnetic Property	Non

 
 
Constantan Wire Tradenames:
Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45,
Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan
 
 
Resistance Alloy- Constantan Sizes / Temper Capabilities
 Condition: Bright, Annealed, Soft 
 Wire diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
 Rod, Bar diameter 1mm-30mm 
 Strip: Thickness 0.01mm-7mm, Width 1mm-280mm 
 
 
Resistance alloy constantan wire material: 
 
Constantan, CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi40 (6J40), CuNi44. 
Characteristics
Constantan has a number of special characteristics due to which it is known as the most versatile alloy that is available.  Some of its important characteristics are:
High specific heat resistance
Negligible temperature Coefficient
Easily ductile
Resistant to atmospheric corrosion
Can be easily soldered and molded

Package

Contact us if you need more details on Copper Nickel Alloy. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Resistance Alloy、Electrical Resistance Alloy Wire. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Copper Nickel Alloys > CuNi Resistance Alloy Strip