FeCrAl wire mesh H23YU5T mesh
Basic Info
Model No.: H23YU5T
Product Description
Model NO.: H23YU5T
Hole Shape: Square
Surface Treatment: Galvanized
Standard Length: Can discuss
Certification: ISO9001
Resisivity: 1.35
Melting point: 1500
Transport Package: The Wooden Case
Origin: Shanghai
Material: Fecral
Application: Construction Wire Mesh, Screening
Weave Technique: Plain Weave
Customized: Customized
The highest temperature: 1250 C
density: 7.25
Trademark: TANKII
Specification: Can discuss
HS Code: 7226920000
H23YU5T 0Cr23Al5Ti wire mesh
Description:
H23YU5T (0Cr23Al5Ti) has characteristics of high resistance, low temperature coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature, especially under the atmosphere containing and/or sulfides, as well as the lower price, it is widely used in industrial electric furnaces, household electrical appliances and far infrared ray devices.
Chemical Composition
| Alloy | Chemical Composition | |||||||
| C | Si | Mn | Cr | Ni | Ti | Al | Fe | |
| H23YU5T | ≤ 0.05 | ≤ 0.50 | ≤ 0.30 | 22.0-24.0 | ≤ 0.60 | 0.2-0.5 | 5.00-5.80 | Bal |
Properties:
| Alloy | 0Cr23Al5Ti H23YU5T |
| Yield strength(MPa) | 630-780 |
| Elongation (%) | > 12 |
| Density g/cm3 | 7.25 |
| Electrical resistivity (Ωmm2/m) | 1.35 ± 0.05 |
| The highest temperature continuous operation (°C) | 1250 |
| Melting point (°C) | 1500 |
| Thermal conductivity (kJ/m*h*°C) | 60.2 |
| Coefficient of linear (α×10-6/°C) | 15.0 |
basic parameters:
| basic parameters | APMTM | FeCrAl | ||
| A-1 | AF | D | ||
| The highestcontinuous working temperature | 1425 | 1400 | 1300 | 1300 |
| The nominal chemical composition,% Cr | 22 | 22 | 22 | 22 |
| AI | 5.8 | 5.8 | 5.3 | 4.8 |
| Fe | ingredients | ingredients | ingredients | ingredients |
| Ni | - | - | - | - |
| The resistivity in 20ºC,Ωmm-2mm-1 | 1.45 | 1.45 | 1.39 | 1.35 |
| density,g/cm3 | 7.1 | 7.1 | 7.15 | 7.25 |
| Thermal expansion coefficientK-1 20-750ºC | 14×10-6 | 14×10-6 | 14×10-6 | 14×10-6 |
| 20-1000ºC | 15×10-6 | 15×10-6 | 15×10-6 | 15×10-6 |
| The thermal conductivity 20ºC,Wm-1K-1 | 13 | 13 | 13 | 13 |
| Specific heat capacity 20ºC,KJkg-1K-1 | 0.46 | 0.46 | 0.46 | 0.46 |
| Melting pointºC | 1500 | 1500 | 1500 | 1500 |
| Probably mechanical characteristics | ||||
| Tensile strength,N mm-2 | 680 | 680 | 680 | 650 |
| The yield strength,N mm-2 | 470 | 475 | 475 | 450 |
| Hardness,Hv | 230 | 230 | 230 | 230 |
| Breaking elongation,% | 20 | 18 | 18 | 18 |
| 900ºCTensile strength,N mm-2 | 40 | 34 | 37 | 34 |
| Creep strength 800ºC | 11 | 6 | 8 | 6 |
| 1000ºC | 3.4 | 1 | 1.5 | 1 |
| Magnetic | magnetic(In the temperature600ºC) | |||
| Emissivity, the oxidation conditions | 0.7 | 0.7 | 0.7 | 0.7 |
Specification:
| Alloy Type | Diameter | Resistivity | Tensile | Elongation(%) | Bending | Max.Continuous | Working Life |
| (mm) | (μΩm)(20°C) | Strength | Times | Service | (hours) | ||
| (N/mm²) | Temperature(°C) | ||||||
| Cr20Ni80 | <0.50 | 1.09±0.05 | 850-950 | >20 | >9 | 1200 | >20000 |
| 0.50-3.0 | 1.13±0.05 | 850-950 | >20 | >9 | 1200 | >20000 | |
| >3.0 | 1.14±0.05 | 850-950 | >20 | >9 | 1200 | >20000 | |
| Cr30Ni70 | <0.50 | 1.18±0.05 | 850-950 | >20 | >9 | 1250 | >20000 |
| ≥0.50 | 1.20±0.05 | 850-950 | >20 | >9 | 1250 | >20000 | |
| Cr15Ni60 | <0.50 | 1.12±0.05 | 850-950 | >20 | >9 | 1125 | >20000 |
| ≥0.50 | 1.15±0.05 | 850-950 | >20 | >9 | 1125 | >20000 | |
| Cr20Ni35 | <0.50 | 1.04±0.05 | 850-950 | >20 | >9 | 1100 | >18000 |
| ≥0.50 | 1.06±0.05 | 850-950 | >20 | >9 | 1100 | >18000 | |
| 1Cr13Al4 | 0.03-12.0 | 1.25±0.08 | 588-735 | >16 | >6 | 950 | >10000 |
| 0Cr15Al5 | 1.25±0.08 | 588-735 | >16 | >6 | 1000 | >10000 | |
| 0Cr25Al5 | 1.42±0.07 | 634-784 | >12 | >5 | 1300 | >8000 | |
| 0Cr23Al5 | 1.35±0.06 | 634-784 | >12 | >5 | 1250 | >8000 | |
| 0Cr21Al6 | 1.42±0.07 | 634-784 | >12 | >5 | 1300 | >8000 | |
| 1Cr20Al3 | 1.23±0.06 | 634-784 | >12 | >5 | 1100 | >8000 | |
| 0Cr21Al6Nb | 1.45±0.07 | 634-784 | >12 | >5 | 1350 | >8000 | |
| 0Cr27Al7Mo2 | 0.03-12.0 | 1.53±0.07 | 686-784 | >12 | >5 | 1400 |
Size details
| Product name | Size range |
| Cold drawing wire | Diameter 0.03-7.5mm |
| Hot-rolled wire rod | Diameter 8.0-12mm |
| Ribbon | Thickness 0.05-0.35mm |
| Width 0.5.0-3.5mm | |
| Cold rolled strip | Thickness 0.5-2.5mm |
| Width 5.0-40mm | |
| hot rolled strip | Thickness 4-6mm |
| Width 15-40mm |
Advantage:
Nickelchromium alloy with high and stable resistance, corrosion resistance, surface oxidation resistance is good, a better under high temperature and seismic strength, good ductility, good workability and weldability. Contact us if you need more details on 0Cr23Al5Ti. We are ready to answer your questions on packaging, logistics, certification or any other aspects about H23YU5T、Wire Mesh. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : FeCrAl Alloys > FeCrAl Resistance Wire
Premium Related Products
Other Products
Hot Products
Au-Cu Wire(AU80-CU20)Tankii manufacturingSeamless C10200 Oxyge- Free Copper Hollow Conductor TubesASTM B265 Gr2 Titanium SheetConstantan Konstantan Wire / CuNi44 WireCuNi6 Copper Nickel Wire (C70400)copper nickel Alloy Constantan Cupro-Nickel CuNi44 Strip/Foil/RibbonChromel Thermocouple wire or cable (type K)Nichrome Strip/Nickel Allloy SheetNickel Chrome Wire (NCHW) for ResistorD Resistance WireBright Annealed Fecral Alloy Strip for ResistorHot Sale Building Materials Aluminum Sheet / PlateHigh Quality Gr5 Round Titanium BarASTM B 338 Gr2 Seamless Titanium Tube/PipeChina Grade 304 316 316L 304L Capillary Stainless Steel Tube6061/6063 T5 Anodized Aluminum Pipe/Tubes