High Quality Manganin Strip, Resistance Alloy Plate, Wound Resistance Strip Suppliers in China

Home > Products > Manganin Products > Other Manganin > resistance wire manganin

resistance wire manganin

Basic Info

Model No.:  6J12

Product Description



Model NO.: 6J12


Material: Cu Ni Mn


Size: 0.01-3mm*0.3-600mm


Trademark: TANKII


Origin: China




Product Type: Wire


Carbon Content: No


standard: GB/ASTM/JIS/BIS/DIN


Specification: SGS


HS Code: 74082900


Resistance Wire manganin





CuNi alloy grade: Constantan, CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23, CuMu12Ni, CuNi34, CuNi40 (6J40), CuNi44.



Manganin is the electric resistance alloy with the copper nickel as the essential component. It has the low resistance temperature coefficient, wide working temperature scope (500 below), good machining property,anti-corrosiveand easy braze welding. Used in manufacturing regenerator's variable resistor and the strain resistor.



Manganin common temperature classes are 130, 155, 180 C,200,220



Manganin is a trademarked name for an alloy of typically 86% copper, 12% manganese, and 2% nickel.



Name
Code
Main Composition (%)
Cu Mn Ni Fe
Manganin 6J8,6J12,6J13 Bal. 11.0~13.0 2.0~3.0 <0.5






Manganin Typical Chemistry:



86% copper, 12% manganese, and 2% nickel



Manganin Size Available:



a) Wire φ8.00~0.02

b) Ribbon t=2.90~0.05 w=40~0.4

c) Plate 1.0t×100w×800L

d) Foil t=0.40~0.02 w=120~5



Mechanical Properties

Max Continuous Service Temp 0-100ºC
Resisivity at 20ºC 0.44±0.04ohm mm2/m
Density 8.4 g/cm3
Thermal Conductivity 40 KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC 0~40α×10-6/ºC
Melting Point 1450ºC
Tensile Strength(Hard) 585 Mpa(min)
Tensile Strength,N/mm2 Annealed,Soft 390-535
Elongation 6~15%
EMF vs Cu, μV/ºC (0~100ºC) 2(max)
Micrographic Structure austenite
Magnetic Property non
Hardness 200-260HB
Micrographic Structure Ferrite
Magnetic Property Magnetic








Resistance Alloy- Shunt Manganin Sizes / Temper Capabilities

Condition: Bright, Annealed, Soft

Wire &Ribbon diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil

Rod, Bar diameter 1mm-30mm

Strip: Thickness 0.01mm-7mm, Width 1mm-280mm

Also enameled condition is available





Contact us if you need more details on Shunt Manganin Wire. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Precision Resistance Wire、Resistance Alloy Wire. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Manganin Products > Other Manganin