Precision soft magnetic alloy 1j50 permalloy wire Hy-Ra49
Basic Info
Model No.: 1j50
Product Description
Model NO.: 1j50 Material: Fe-Ni Diameter: 0.1~10mm Surface: Bright/ Dard resistivity: 0.45 Curie point: 500 Trademark: Fe-Ni Alloy 1J50 Specification: RoHS, SGS HS Code: 750522000 Product Type: Wire Carbon Content: Less Than 0.03% Condition: Soft/ Hard Linear expansion coefficient: 9.20 density: 8.2 Saturation magnetostriction coefficient: 25.0 Transport Package: Inner Core, Waterproof Paper, Wooden Case Origin: China 1J50/ Ni50 wire/ E11a wire
Brand: 1J50
Classification: Alloys of precision soft magnetic
Supplement: alloy has a high permeability and low saturation induction of technical
Application: For cores between the tube and small power transformers, chokes, relays and parts of magnetic circuits operating at elevated inductions without bias or small bias
Chemical Composition in % 1J50
Here you can buy Alloy 1J50 (tape) on better terms.
Technical properties
Alloy 1J50 with high magnetic permeability, having the highest value of the saturation induction of the entire group of iron-nickel alloy, not less than 1.5 T. Alloy crystallographic texture and with a rectangular hysteresis loop
Basic physical constants and mechanical properties of the alloy:
Density: γ = 8,2 g / cm3;
Electric resistivity: ρ = 0,45 ohm mm2 ? / m;
Curie Point Temperature: Θs = 500 ° C;
Saturation magnetostriction: λS = 25 ? 106;
Brinell Hardness: 170/130 HB;
Ultimate: Rm = 780/440 MPa;
Yield strength: σ0,2 = 685/145 MPa;
Modulus of elasticity E = 160 kN / mm2;
Elongation: δ5 = 3/35%;
Relative compression: φ = 15/60%.
The magnetic properties of the alloy
Features brand alloy 1J50
1J50 magnetic alloy is characterized by increased permeability parameters and saturation induction. Grade 1J50 alloy suitable for the production of products, remains dimensionally stable under varying magnetic fields. To improve the performance of electromagnetic 1J50 doped molybdenum alloy, silicon, chromium, manganese, copper and other elements. Melting Alloy 1J50 is performed in neutral gases or vacuum. Sheet and strip 1J50 stamped cold-rolled and annealed to improve the magnetic properties.
Application Alloy 1J50
Grade 1J50 alloy demand in the production of cores of power transformers, meters of chips for the magnetic field and magnetic circuit components. Due to the high magnetoresistive properties to buy 1J50 is suitable for the production of magnetic field sensors, magnetic recording heads and transformer plates.
Allowed to use the brand 50H alloy for the production of the appliance, which must remain constant size at different temperatures. Due to the low magnetostriction alloy 1J50 brand used in precision magnetomechanical devices. Depending on the direction and magnitude of the magnetic field value of the electric resistance of the material 1J50 varies 5%, which allows you to buy 50H for the production of sensitive instrumentation.
If you are interested in our products, please contact with me!
Shanghai Tankii Alloy Material Co., LTD
Lesha Zhang
Contact us if you need more details on 1j50 Wire. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hy-Ra49 permalloy、E11A Wire. If these products fail to match your need, please contact us and we would like to provide relevant information.
Brand: 1J50
Classification: Alloys of precision soft magnetic
Supplement: alloy has a high permeability and low saturation induction of technical
Application: For cores between the tube and small power transformers, chokes, relays and parts of magnetic circuits operating at elevated inductions without bias or small bias
Chemical Composition in % 1J50
Ni 49-50.5% | Fe 48.33-50.55% | C 0.03% | Si 0.15 - 0.3% | Mn 0.3 - 0.6% | S o 0.02% |
P 0.02% | Mo - | Ti - | Al - | Cu 0.2% |
Here you can buy Alloy 1J50 (tape) on better terms.
Technical properties
Alloy 1J50 with high magnetic permeability, having the highest value of the saturation induction of the entire group of iron-nickel alloy, not less than 1.5 T. Alloy crystallographic texture and with a rectangular hysteresis loop
Basic physical constants and mechanical properties of the alloy:
Density: γ = 8,2 g / cm3;
Electric resistivity: ρ = 0,45 ohm mm2 ? / m;
Curie Point Temperature: Θs = 500 ° C;
Saturation magnetostriction: λS = 25 ? 106;
Brinell Hardness: 170/130 HB;
Ultimate: Rm = 780/440 MPa;
Yield strength: σ0,2 = 685/145 MPa;
Modulus of elasticity E = 160 kN / mm2;
Elongation: δ5 = 3/35%;
Relative compression: φ = 15/60%.
The magnetic properties of the alloy
Type | Class | Thickness or diameter, mm | The initial magnetic permeability | Maximum magnetic permeability | Coercive force | Technical saturation induction | |||
mH / m | G / E | mH / m | G / E | / | E | (10-4 G) | |||
No more | No more | No less | |||||||
cold-rolled strips | 1 | 0,05 0,08 | 2,5 | 2000 | 25 | 20000 | 20 | 0,25 | 1,50 |
0,10 0,15 | 2,9 | 2300 | 31 | 25000 | 16 | 0,20 | |||
0,20 0,25 0,27 | 3,3 | 2600 | 38 | 30000 | 12 | 0,15 | |||
0,35 0,50 | 3,8 | 3000 | 44 | 35000 | 10 | 0,12 | |||
0,80 1,0 | 3,8 | 3000 | 38 | 30000 | 12 | 0,15 | |||
1,5 2,0 2,5 | 3,5 | 2800 | 31 | 25000 | 13 | 0,16 | |||
hot rolled sheets | 3-22 | 3,1 | 2500 | 25 | 20000 | 24 | 0,30 | ||
Bars | 8-100 | 3,1 | 2500 | 25 | 20000 | 24 | 0,30 | ||
cold-rolled strips | 2 | 0,10 0,15 | 3,8 | 3000 | 38 | 30000 | 14 | 0,18 | |
0,20 0,25 | 4,4 | 3500 | 44 | 35000 | 12 | 0,15 | |||
0,35 0,50 | 5,0 | 4000 | 56 | 45000 | 10 | 0,12 | |||
0,80 1,0 | 5,0 | 4000 | 50 | 40000 | 10 | 0,12 | |||
1,5 2,0 | 3,8 | 3000 | 44 | 35000 | 12 | 0,15 | |||
cold-rolled strips | 3 | 0,05 0,10 0,20 | 12,5 * | 10000 * | 75 | 60000 | 4,0 | 0,05 | 1,52 |
Features brand alloy 1J50
1J50 magnetic alloy is characterized by increased permeability parameters and saturation induction. Grade 1J50 alloy suitable for the production of products, remains dimensionally stable under varying magnetic fields. To improve the performance of electromagnetic 1J50 doped molybdenum alloy, silicon, chromium, manganese, copper and other elements. Melting Alloy 1J50 is performed in neutral gases or vacuum. Sheet and strip 1J50 stamped cold-rolled and annealed to improve the magnetic properties.
Application Alloy 1J50
Grade 1J50 alloy demand in the production of cores of power transformers, meters of chips for the magnetic field and magnetic circuit components. Due to the high magnetoresistive properties to buy 1J50 is suitable for the production of magnetic field sensors, magnetic recording heads and transformer plates.
Allowed to use the brand 50H alloy for the production of the appliance, which must remain constant size at different temperatures. Due to the low magnetostriction alloy 1J50 brand used in precision magnetomechanical devices. Depending on the direction and magnitude of the magnetic field value of the electric resistance of the material 1J50 varies 5%, which allows you to buy 50H for the production of sensitive instrumentation.
If you are interested in our products, please contact with me!
Shanghai Tankii Alloy Material Co., LTD
Lesha Zhang
Contact us if you need more details on 1j50 Wire. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hy-Ra49 permalloy、E11A Wire. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Precision Alloys > Soft Magnetic Alloys
Premium Related Products
Other Products
Hot Products
Au-Cu Wire(AU80-CU20)Tankii manufacturingSeamless C10200 Oxyge- Free Copper Hollow Conductor TubesASTM B265 Gr2 Titanium SheetConstantan Konstantan Wire / CuNi44 WireCuNi6 Copper Nickel Wire (C70400)copper nickel Alloy Constantan Cupro-Nickel CuNi44 Strip/Foil/RibbonChromel Thermocouple wire or cable (type K)Nichrome Strip/Nickel Allloy SheetNickel Chrome Wire (NCHW) for ResistorD Resistance WireBright Annealed Fecral Alloy Strip for ResistorHot Sale Building Materials Aluminum Sheet / PlateHigh Quality Gr5 Round Titanium BarASTM B 338 Gr2 Seamless Titanium Tube/PipeChina Grade 304 316 316L 304L Capillary Stainless Steel Tube6061/6063 T5 Anodized Aluminum Pipe/Tubes