1/16′′ 1.6mm Monel 400 Wire Used in Thermal Spray

Model NO.: Monel 400


Material: Nickel Copper Monel 400


PCD: HRB 75-85


Hole: 0


Status: Soft


Serves: Small Order Accepted


Transport Package: Monel 400 Packed 15kg/Spool, Carton, Wooden Case


Origin: Shanghai, China




Product Type: Wire


Carbon Content: Low Carbon


ET: 0


Surface: Bright


Sample: Avaiable


Trademark: TANKII


Specification: in customers′ requirement


HS Code: 75052200



Monel 400 Thermal Spray Wires



Introduction:

Monel 400 shows high strength and excellent corrosion resistance in a range of acidic and alkaline environments and especially suitable for reducing conditions. It also has good ductility and thermal conductivity.

It can Equivalent to: Tafa70T.



Surface Preparation:

Surface should be clean, white metal, with no oxides(rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.

Recommended method of preparation is to grit blast with 24 mesh aluminum oxide, rough grind or rough machine in a lathe.



Chemical Composition:

Grade	Ni	Fe	Cu	C	Mn	Si	S
Monel 400	Min63	Max2.5	Max0.3	Max0.3	Max2	Max0.5	Max0.024

Physical Properties:

Grade	Density	Melting Point
Monel 400	8.83g/cm3	1350

Typical Deposit Characteristics:

Typical Hardness	Bond Strength	Deposit Rate	Deposit Efficiency	Machine Ability
HRB 84	4310 psi	10 lbs/hr/100A	70%	Good

Applications:

(1)Machine element restoration

(2)Sea water immersion

(3)Propellers

(4)Steam valve components

(5)Printing rolls

Packaging:

Products are generally supplied in standard cardboard boxes, pallets, wooden boxes. Special packaging requirements can also be accommodated. (also depend on the customers' requirements)For the Thermal spray wires , we pack the wires on spools. Then put spools into cartons, Then put the cartons onto pallet.

Diameter	Dimension Tolerance	Packing	Wire Weight
1/16''(1.6mm)	+0/-0.05	D 300 Spool	15kgs(33 lbs)/spool
2.0mm	+0/-0.05	D 300 Spool	15kgs(33 lbs)/spool
1/8''(3.17mm)	+0/-0.05	Coil Form	20-400kgs/coil

Shipping:

We cooperation with many logistics company,We can provide express, sea transportation, air transportation, and rail way transportation based on customers' requirement.









Our service:

1) We can provide a free sample for testing but the freight at yours.

2) Mill test certificate will be provided after production, If it is necessary.

3) Good packing methods to keep goods no damage during delivery

4) We cooperate with many famous forwarder, will try our best to choose the safty, convenience, quick, and cheap mode of transportation for our customers.

Contact us if you need more details on Monel 400 Thermal Spray Wire. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Thermal Spray Wire、Monel 400. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Thermal Spray Wire